A manual hydraulic pump is a tool that relies on a manual operating handle to generate hydraulic pressure. Applicable to split hydraulic products such as split hydraulic pullers and split hydraulic jacks. It is widely used in many fields such as shipbuilding industry, coal mining machinery, petrochemical, metallurgy, electric power and heavy machinery and other occasions that require hydraulic power.
Manual hydraulic pumps can be used with lifting, jacking, bendong,straightening,stretching, punching,disassembly and other operations.It is widely accepted by users for its advantages such as small size, light weight, easy to carry and strong safety.
The pump is designed with high and low pressure and fast oil output. Compared with other types of hydraulic pumps such as electric hydraulic pumps, manual hydraulic pumps can work without external power supply, so they have higher energy efficiency and lower energy consumption. In addition, its low-pressure and high-flow oil supply and high-pressure and low-flow oil supply design under constant power conditions also improves work efficiency and saves time.
Manual operation mode, the oil pipe can be purchased and extended, and comes with a quick connector.
The pressure can be kept at an intermediate stop, and the internal design is a high-pressure safety protection hydraulic valve, built-in pressure reducing valve and safety relief valve and other devices can effectively prevent pressure overload and accidents.
The oil pipe joint is equipped with ZG3/8" thread;
- 1.Make sure the hydraulic oil level is in the upper middle of the oil window. If necessary, add the same type of hydraulic oil from the hydraulic oil filling port.
-
2.Check whether all connections are tight to prevent leakage during use.
Items No. |
CP-700 |
Size |
620*100*150MM |
High pressure |
700kg/cm2 |
High pressure Flow |
2.3CC |
Low pressure |
20kg/cm2 |
Low pressure Flow |
13CC |
Reserve oil |
0.9L |
Oil line |
2M |
Net weight |
10kg |
Gross Weight |
12.5kg |