How to use Cable Wire Grip Come Along Clamp
- After the come along clamp holds the ground wire, the tension is applied to the pull ring, and the sliding shaft of the pull ring slides in the body wire slot, and drives the connecting plate, and the movable jaw seat rotates accordingly.
- Because the other end of the movable jaw seat is hinged firmly with the jaw, when rotating, the movable jaw is forced to press down along the pin shaft, and the cable is pressed on the fixed jaw seat.
- The greater the tension on the pull ring, the greater the downward pressure on the movable jaw, so as to ensure that the ground wire is tightly clamped by the movable jaw and the fixed jaw.
Product Parameters
Product model |
Applicable conductor (mm2) |
Rated load (KN) |
Max openning (mm) |
Weight (kg) |
|
KXLM1-1 |
25-70 |
10 |
14 |
1.1 |
|
KXLM1-2 |
95-120 |
15 |
18 |
1.5 |
|
KXLM1-3 |
150-240 |
25 |
24 |
2.7 |
|
KXLM1-4 |
300-400 |
40 |
32 |
3.8 |
|
KXLM1-5 |
500-630 |
60 |
37 |
6.7 |
|
KXLM1-6 |
720-800 |
70 |
40 |
10.0 |
Product model |
Applicable conductor (mm2) |
Rated load (KN) |
Applicable conductor Dia |
Weight (kg) |
|
KXLM2-1 |
25-70 |
10 |
12.8-17.8 |
1.5 |
|
KXLM2-2 |
95-120 |
15 |
19.6-21 |
2.4 |
|
KXLM2-3 |
150-240 |
25 |
22.6-26.4 |
3.6 |
|
KXLM2-4 |
300-400 |
35 |
27.4-29.8 |
5.4 |
Related PRODUCTS