Working Principle
- The working principle of the ratchet tensioner is based on the anti-reverse action of the pawl.
- During use, the steel wire rope or galvanized iron wire on the tensioner is first loosened and fixed on the cross-arm.
- Then, a wire clamp is used to grip the conductor. Next, by turning a special wrench, the pawl gradually winds the steel wire rope or galvanized iron wire around the ratchet drum, thereby tightening the conductor.
- After tightening, the conductor is fixed on the insulator, and then the pawl and wire clamp are released to complete the tightening
Gné
- 1. Thread coil wire rope
- Anti-twist type thickened steel wire rope, without loose rope and burr. 360°crimping does not fall off, solid and durable.
- 2. Anti-skid handle
- Anti-slip thread design, use the fitting handle for a long time, 360 rotation control clamp can rotate backwards, and can be loosened in both directions.
Sonraíocht
|
Mionsamhail |
Pulling force(KN) |
Meáchan(kg) |
|
JXRS-05 |
5 |
2.6 |
|
JXRS-10 |
10 |
3.2 |
|
JXRS-15 |
15 |
4.0 |
|
JXRS-20 |
20 |
4.3 |
|
JXRS-30 |
30 |
6.2 |
|
Material |
High-strength alloy steel |
|
|
Function |
Fixation/traction/lifting |
|
|
accessory products |
Used in conjunction with cable clamps |
|
